|
|
最近刻盤總是失敗，已經刻壞3張盤了，原來卻沒有這種情況。原來用的是TDK的盤，現在用的是清華同方。請問是盤的問題，還是刻錄機本身的問題。
問題顯示如下：
Lenovo User
Lenovo (Beijing) Limited
1A20-020N-00A3-2091-2172-6487*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004-7-22 16:33:44
Nero版本： 6.3.1.20 (Nero Express)
刻錄機： <TSSTcorp CDW/DVD TS-H492A>版本: TB51 - HA 1 TA 1 - 6.3.1.20
適配卡驅動程序： <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-140C >版本: a101 - HA 1 TA 0 - 6.3.1.20
適配卡驅動程序： <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340015A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-140C atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : TSSTcorp CDW/DVD TS-H492A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-140C G: CDRom0
TSSTcorp CDW/DVD TS-H492 H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 503MB (515568kB)
Free physical memory: 293MB (300140kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.6.2006
CD-ROM (ISO)
9:40:53 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:40:53 #2 Phase 89 File dlgbrnst.cpp, Line 1855
超級鏈接已激活
9:40:53 #3 Text 0 File Reader.cpp, Line 126
Reader running
9:40:53 #4 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CDW/DVD TS-H492A running
9:40:53 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:40:53 #6 Text 0 File Burncd.cpp, Line 3173
Turn on 軌道一次刻錄, using CD-R/RW media
9:40:53 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 334252 ( 74:18.52)
9:40:53 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
9:40:53 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: TSSTcorp CDW/DVD TS-H492A;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
9:40:53 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:40:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 334253 (334253) = #334253/74:16.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 334251 blocks [TSSTcorp CDW/DVD TS-H492A]
--------------------------------------------------------------
9:40:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CDW/DVD TS-H492A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 684857344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
334253 | lead-out | 1 | 0x00 | 0x41
9:40:53 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 334253 -> 334251.
9:40:53 #14 Phase 24 File dlgbrnst.cpp, Line 1855
文件暫存過程開始
9:40:53 #15 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
9:40:53 #16 Phase 25 File dlgbrnst.cpp, Line 1855
文件暫存過程完成
9:40:53 #17 Phase 36 File dlgbrnst.cpp, Line 1855
以40x (6,000 KB/s)的速度開始刻錄
9:40:54 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:40:54 #19 Text 0 File Mmc.cpp, Line 20531
Set BUFE: Super Link -> ON
9:45:24 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:50:18 #21 CDR -1169 File ThreadedTransferInterface.cpp, Line 1830
邏輯裝置尚未就緒，操作進行中
TSSTcorp CDW/DVD TS-H492A\H1 T1
9:50:18 #22 TRANSFER -18 File ThreadedTransferInterface.cpp, Line 1830
無法執行結束軌道
9:50:18 #23 Text 0 File Mmc.cpp, Line 15356
<TSSTcorpCDW/DVD TS-H492A> start Close Session
9:54:00 #24 SCSI -1135 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
9:54:00 #25 CDR -1135 File WriterStatus.cpp, Line 245
寫錯誤
9:54:00 #26 TRANSFER -19 File WriterStatus.cpp, Line 245
無法進行結束區段的動作
9:54:00 #27 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation
9:54:00 #28 Text 0 File Mmc.cpp, Line 15356
<TSSTcorpCDW/DVD TS-H492A> start Close Session
9:54:18 #29 SCSI -1135 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
9:54:18 #30 CDR -1135 File WriterStatus.cpp, Line 245
寫錯誤
9:54:18 #31 TRANSFER -19 File WriterStatus.cpp, Line 245
無法進行結束區段的動作
9:54:18 #32 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
9:54:18 #33 Phase 39 File dlgbrnst.cpp, Line 1855
刻錄中止
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-8-17 12:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
|
狗仔卡
提升卡
置頂卡
沉默卡
喧囂卡
變色卡
搶沙發
樓主